When a room is used for all three, the door is open far more than the plant was designed for. We set the defrost for the real traffic, fit door hardware that closes itself, and check the air path so the middle of the stack is not a dead pocket. Temperature logging turns a vague worry into a record you can act on.
What that means in practice
- Defrost set for constant kitchen traffic
- Self-closing door hardware
- Air path and stacking advice
- Temperature logging for stock protection
The service behind it
A freezer room is a harder job than a cold room in every respect. The temperature difference across the panels is larger, moisture in the air wants to condense on anything that bridges it, and the defrost cycle has to clear ice without warming the stock. When any of that is wrong, the room ices from the door frame inward.
Read the full freezer rooms pageQuestions
Ice forms on the ceiling of the freezer room. Why?
That is usually air ingress plus a defrost cycle that is too short to clear the coil, so frost migrates and builds overhead. Door seals, the sweep and the defrost termination all need checking together.
Can an existing cold room be converted to a freezer room?
Sometimes, but not by turning the controller down. The panels, floor insulation, door heater and defrost arrangement all have to suit a much larger temperature difference. We assess the envelope before quoting, because a converted room that ices up is more expensive than one built correctly.
How do you stop ice forming around the door?
Door heaters, a correct sweep, a level threshold and a defrost cycle matched to door traffic. If warm air is reaching the frame, the fix is at the door rather than in the refrigeration circuit.