A room sized on steady storage will struggle on the day a delivery lands at 12 C. We look at what arrives, in what quantity, and how quickly it has to pull down, then check the door heater, sweep and threshold because that is where ice starts. Product stacking matters as much as plant: a room packed to the ceiling has no air path, and the middle of the stack warms first.
What that means in practice
- Sizing for delivery-day pull-down, not average storage
- Door heater, sweep and threshold repairs
- Defrost termination and drain heater faults
- Temperature logging so a bad night is visible
The service behind it
A freezer room is a harder job than a cold room in every respect. The temperature difference across the panels is larger, moisture in the air wants to condense on anything that bridges it, and the defrost cycle has to clear ice without warming the stock. When any of that is wrong, the room ices from the door frame inward.
Read the full freezer rooms pageQuestions
Why is product soft in the middle of the stack?
Almost always airflow rather than capacity. Stacking above the evaporator discharge, or blocking the return, leaves a still pocket in the middle of the room. We check air path and load pattern before discussing a larger unit.
Can an existing cold room be converted to a freezer room?
Sometimes, but not by turning the controller down. The panels, floor insulation, door heater and defrost arrangement all have to suit a much larger temperature difference. We assess the envelope before quoting, because a converted room that ices up is more expensive than one built correctly.
How do you stop ice forming around the door?
Door heaters, a correct sweep, a level threshold and a defrost cycle matched to door traffic. If warm air is reaching the frame, the fix is at the door rather than in the refrigeration circuit.